Stage 1 Remap in Andover
A bespoke Stage 1 ECU calibration for drivers in Andover: more power and torque, sharper response and a smoother drive, carried out at our performance workshop in Bournemouth.
- Up to 30% more power & torque
- Typically 2–3 hours
- Original software kept on file
Stage 1 ECU Remap for Andover drivers.
At around 36 miles from Andover, our workshop is worth the journey. Owners travel from across Hampshire because they want the work done properly. We plan your visit carefully and agree timings in advance, so the day runs to schedule.
A Stage 1 remap is a recalibration of your vehicle’s Engine Control Unit (ECU), the software that decides how much boost, fuel and ignition advance the engine runs at every moment. Manufacturers calibrate conservatively so one map can suit every market, fuel quality and driver. A Stage 1 calibration refines those settings for your car, on UK fuel, within safe mechanical limits.
No hardware changes are needed. Stage 1 is designed for vehicles on factory components, and for most turbocharged cars it is the single most effective upgrade you can make.
Every file is developed for your make, model and engine. We are licensed WinOLS users and write our own calibrations in-house, so you are not receiving a generic file that has been sold a thousand times.
Read more about our stage 1 ECU remap service.
What a Stage 1 remap delivers.
More power, where you use it
Turbocharged engines typically gain 20–30% more power and torque, with the biggest difference felt in the mid-range when overtaking or joining a motorway.
Sharper throttle response
Flat spots and hesitation are calibrated out, so the car responds the moment you ask it to.
Smoother delivery
Power arrives progressively and predictably, not as a spike. The car feels more refined, not more raw.
Economy on a steady cruise
Driven gently, many cars return better fuel economy thanks to the extra torque at lower revs.
Our workshop.
- Address
- Unit 3, Churchill Business Park, Provence Drive
Bournemouth BH11 9FA - Distance
- Around 36 miles from Andover
- what3words
- ///protrude.sized.trooper
- Visits
- By appointment
Trusted by owners in and around Andover.
Callum, very polite, knowledgeable and excellent guy, did an amazing job fitting an exhaust, coil packs, spark plugs, induction kit and a remap, and it all works and sounds brilliant. I would not hesitate to use Pro Tuning again.
Used Pro Tuning as my Peugeot had an AdBlue problem. Turned up on time which is great! Sorted it out! Then an issue with the family Range Rover: new battery fitted and coded. Very reasonable and spot on service, thanks! Will use again and recommend!
Reached out to Callum on email to ask about some upgrades for my Audi S4, told him what I wanted and he recommended the right parts for the job. He even took the time to expand on what I could possibly do in the future if I needed it as well as the cost vs benefit comparison. I had my exhaust and air intake upgraded on this occasion. Callum fitted a cat-back Milltek system which gives the exact sound I was after. He even took the time to show me the stock pipes afterwards and explain where I’ll benefit from the new one vs the old.
Stage 1 Remap in Andover: your questions answered.
Where is the remap carried out for customers in Andover?
All work is carried out at our workshop at Unit 3, Churchill Business Park, Provence Drive, Bournemouth BH11 9FA, around 36 miles from Andover. Working in the workshop means proper diagnostics, a controlled environment and the full range of equipment.
How long does a Stage 1 remap take?
Most Stage 1 remaps take 2–3 hours including pre-checks. We will confirm timings when you book, so you can plan your visit.
How much more power will I get?
Turbocharged engines typically gain 20–30% more power and torque. We will give you realistic figures for your car before we start.
Can the remap be reversed?
Yes. Your original ECU software is saved before any change and can be restored at any time.
Do you offer “pop and bang” maps in Andover?
No. Crackle and burble maps are not road legal and are antisocial. We do not offer them anywhere.
Often booked together.
Stage 2 ECU Remap
Software calibrated around upgraded hardware: downpipe, intake and intercooler. For owners who want the car to reach its full potential.
ExploreHardwarePerformance Air Intakes
High-flow induction systems that improve airflow, throttle response and induction sound.
ExploreCalibrationGearbox Tuning
Faster shifts, raised torque limits and refined launch behaviour for modern automatic and dual-clutch gearboxes.
ExploreBook your Stage 1 remap in Andover.
Share a few details and we’ll come back to you personally within one working day with our recommendations and an exact price. No obligation.
Unit 3, Churchill Business Park, Provence Drive, Bournemouth BH11 9FA